RAM Concept CONNECT Edition V8 Update 1

RAM Concept CONNECT Edition V8 Update 1 | 803.4 mb The Structural Products development team is pleased to announce the availability of RAM Concept CONNECT Edition V8 Update 1 (build 08.01.00.27) is an analysis and design program that uses the finite element method for elevated concrete floor systems, or mat foundations. Enhancements RAM Concept CONNECT Edition V8 Update 1 includes the enhancements discussed below. Temperature and Shrinkage Strain Loading Uniform and linearly varying temperature changes and shrinkage/strain changes can now be specified and applied to RAM Concept members. AS 3600-2018 The AS 3600-2018 design code is now implemented. Critical Support Ratio Span Segment Property A new span segment property to define a critical support ratio has been added for all design codes. When span segments are defined with the automatic support width detection option, the defined ratio places the first and last cross section in the design strip at a distance equal to the specified ratio times the distance from the support centerline to the support face. This change applies to all design codes implemented in the program. As AS 3600-2018 Clause 6.2.3 requires the first and last cross section in the design strip to be placed at 0.7 times the distance from the support centerline to the support face, the default Critical Section Support Ratio is set to 0.7 for all AS 3600 design codes. A default of 1.0 is used for all other design codes, which will place the first and last cross section at the face of the support for rectangular or square columns and walls. Defect Corrections RAM Concept CONNECT Edition V8 Update 1 includes the defect corrections discussed below. File Is Not Recognized Format Error When Importing AutoCAD 18 DWG/DXF A file format error occurred when attempting to import drawing files saved in AutoCAD 18. The error prevented the file from importing. Blank Audit Reports A blank Audit report was generated when the information in the report exceeded 2 MB. Long Analysis Times - Multi-Threading In some models, multi-threading caused delays during the analysis, which resulted in longer analysis times. PT Optimization Run Failure Error Due to Generated Jacks A run failure prevented PT optimizations in models with generated jacks and tendons defined with the "Strands" Tendon Specification Type. Calculation of EC2 Crack Width for Pure Tension Case For sections with pure tension, the tension zone depth was limited to the section depth for use in the calculation of hc,ef and sr,max. The tension zone depth is now permitted to exceed the section depth. This change could result in changes to the reinforcing ratio (typically reducing it) and can increase crack spacing when reinforcement is not satisfied. CSA A23.3 Shear/Torsion Tension Calculation When doing the final check for CSA A23.3 shear/torsion tension for the flexural/axial strength, the program was incorrectly including any provided torsion reinforcement in the determination of Vs when calculating the longitudinal reinforcement capacity in accordance with equation 11.21. This could have resulted in an overestimated Vs, an underestimated shear tension force when there was torsion on the section, and an unconservative reported flexural capacity for the section. When performing flexural/axial design in the design passes prior to the final check, the transverse torsion reinforcement was correctly excluded from this calculation, so RAM Concept's reported designs for this provision considered this effect correctly. File Compatibility Warning RAM Concept CONNECT Edition V8 Update 1 can read all previous file formats, but writes files in a format that cannot be read by previous versions. RAM Concept is a software application for the structural analysis and design of conventionally reinforced and post-tensioned concrete floors, mats, and rafts. RAM Concept contains an advanced feature set that allows for the design of a wide variety of floor systems including post-tensioned, reinforced concrete and hybrid systems, elevated slabs and mat/raft foundations, one-way slabs, two-way slabs, beams, and joist systems. Historically, the vast majority of concrete floors have been analyzed by approximating a region of a slab as a frame (or design strip), and then analyzing the frame/strip using variations of conventional frame or moment distribution analysis techniques. There are two limitations to this approach. First, in irregular structures, the approximation of the real structure into a frame model could be grossly inaccurate and designing with the analysis results might not even satisfy equilibrium requirements in the real structure. The second limitation is that even in regular structures with regular loadings, the frame analysis approximates the slab/column interaction and provides no information regarding the distribution of forces across the design strip. RAM Concept enables the engineer to design post-tensioned and reinforced concrete slabs by using a finite element model of the entire slab. RAM Concept can predict the elastic behavior of a slab much more accurately than frame models. In addition, the finite element method guarantees that the analysis satisfies all equilibrium. In this RAM Concept training video, we introduce you to the new post-tension optimization workflow. Bentley Systems, Incorporated is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions. Product: RAM Concept Version: CONNECT Edition V8 Update 1 (build 08.01.00.27) Supported Architectures: x64 Website Home Page : www.bentley.com Language: english System Requirements: PC * Supported Operating Systems: * Size: 803.4 mb Recommended Computer Specifications for Structural Products Operating System requirements Supported: Windows 7 Professional 64-bit, Windows 8 Professional 64-bit, Windows 10 Pro 64-bit Recommended: Windows 10 Professional 64-bit (all with latest updates applied) Internet Connection For the Subscription Entitlement Service (SES) Licensing used in all RAM and STAAD CONNECT Edition software an internet connection is required. A license file can be reserved and copied to a machine in the rare case where no internet connection is allowed. Graphics card Bentley strongly recommends avoiding onboard graphics chips in favor of a discrete GPU from the nVidia GeForce or Quadro range with at least 128-bit bus and 1 GB of RAM, or equivalent solution from ATI/AMD. Processor While some of the solvers in our structural products can utilize multiple processors, most product routines utilize one processor at a time. Consequently, processor clock speeds are more important than the number of processors for performance. One of our solvers in RAM products uses Intel-provided technology, which only works on Intel brand processors. Alternative solvers still work with AMD or other processors. Hard Disk At least 2 GB free space on the partition where the Windows is installed, and 2 GB free space on the partition where projects are saved. Large projects may require significantly more space. Random Access Memory (RAM) Recommended: at least 4 GB. Large projects may require more. Video modes Required: 1024 x 768 pixels, 32-bit color palette Recommended: 1920 x 1080 pixels, 32-bit color palette Added by 3% of the overall size of the archive of information for the restoration [/center] x RAM Concept CONNECT Edition V8 Update 1 [/center] Close Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me

Download now LINK