DS SIMULIA Antenna Magus Professional 2021.1 v11.1.0 Professional

ANTENNA MAGUS FEATURES 2021

Smart Find by Value
Find Mode functionality has been improved to allow the specification of values for frequency, gain and bandwidth. Combined with the existing keyword search, a goodness factor is used to indicate the suitability of any given device. The result is a refined search with suggested device templates that are better matched to user requirements.
The improved Smart Find uses keywords, designable objective ranges and non-designable typical information ranges of each device, along with a unique search function and value weighting to arrive at a goodness factor. In addition, unsuitable templates may be manually excluded by the user.

The search results are ordered according to a descending goodness factor, listing the most suitable devices at the top. A Preview Pane automatically expands on the right hand side of the workspace with information about the currently selected device in the workspace - in this case the most suited.
Radome Library
A library with fully parametric exportable radome geometries has been added to Antenna Magus. Each radome is presented with sketches and an information document, and may be used within other CST Studio Suite projects. The radomes extend the currently available library of substrates, waveguides and connectors.
The radome library currently contains a selection of aerodynamic nose cones; the main shapes/profiles available are conical, elliptical, Haack, ogive, parabolic and power series

Constructions
A Construction is a more practical rendering of an antenna / device using multiple building blocks that already exist in Antenna Magus. In this context, a building block refers to a device, a transition / balun, connector or radome / lens.
While each building block is useful in its own right, a more practical model may be constructed by using a combination. The typical manual approach of combining blocks using anchor points and system assembly modeling (SAM) in CST Studio Suite is automated using an integrated construction macro. The automation produces a full assembly model, which may be solved by setting up the desired Simulation Project in CST Studio Suite.
Devices that contain a construction as part of their Export capability are indicated in Find Mode with a constructions indicator, and are grouped under the Constructions tab. Available Constructions are listed under CST Studio Suite in Export Mode.

As an example, the Self-complimentary Archimedes Spiral Antenna with Absorber-lined Cavity Backing is available as a construction featuring a continuously tapered coaxial to parallel wire transition and an SMA connector (2 hole female panel mount with extended PTFE). The connector replaces the ideal feed of the spiral, while the transition transforms the impedance from 188 to 50 Ω.
The assembly is generated by opening the base model in CST Studio Suite and executing the construction macro while in the Schematic View. An information text file is included among the exported files with the relevant instructions.
Details regarding the Construction as well as images of the building blocks are provided in the information document. It is important to note that the base model is the only designable building block of the construction. Parameters of all additional building blocks are derived using parameters of the base model, or use specific assumptions. These modifications are applied during the execution of the constructions macro.

NEW ANTENNAS AND EXTENSIONS

The total number of devices in the Antenna Magus database is now 372 with the inclusion of 1 new antenna.
Slots are commonly used to enhance the impedance bandwidth of microstrip antennas. In the Stacked Rectangular Broadband Patch with V-Slot, a patch with a truncated letter 'V' slot is layered with a simple rectangular patch. Exploiting parasitic coupling, impedance bandwidths of up to 47 % can be achieved with this configuration.

Device Extensions
Additional export models with various dielectric covers have been added for a total of 71 existing antenna prototypes. These variations include superstrates, lenses, elliptical and cylindrical covers. Prototypes featuring variations are marked with a green antenna/dome icon at the bottom of the card as shown below. All prototypes with variations may be viewed by clicking the Variations tab in Find Mode.

It is important to note that Variations do not undergo the same validation as standard export models. A brief overview of the variation is provided in Export Mode as part of the export model information.
Antenna Magus Professional 2021.1 Release Notes- Release date: 27 November 2020
New Features and Improvements
- Find mode was improved to automatically update the search after closing a custom specification [MAGUS-29276]
- Icons in AM have been updated with a more dynamic appearance [MAGUS-29269]
- An icon has been added to indicate an editable array in the Palette [MAGUS-29268]
Bug Fixes
- F-Solver models were updated to use the new Tet Mesher [MAGUS-29232] [MAGUS-29208]
- Design range extrapolation no longer crashes for the Printed LPDA [CST-64102]
- Physical properties from specification are now used correctly [CST-62393]
- Objectives state now correctly updated when using specification [CST-62079]
- DSLS radio button in the License Settings has been fixed to exhibit the correct behavior [MAGUS-29285]
- Bandwidth ratio now correctly indicated for wideband devices [CST-62915]
- Patterns from snapshot designs are now available for selection as element patterns for array synthesis [CST-64475]
- Keywords no longer disappear after editing a specification [CST-64465]
- The default license port has been changed to 27000 [MAGUS-29289]

Antenna Magusis a software tool for the acceleration of the antenna design and modeling process. Validated antenna models can be exported to CST Studio Suite from a huge antenna database of over 350 antennas.
Antenna Magus has proven to be an invaluable aid to antenna design engineers and to anyone who requires antenna models for antenna placement and/or electromagnetic interference studies. An engineer can make a more informed choice of antenna element, providing a good starting design and thus increasing efficiency.
Antenna Magus How-To Tutorials | Antenna Design | Electromagnetics
MAGUS (Pty) Ltd.develops antenna design and information management software. Antennas designed using its software can be used in a wide variety of applications at various frequency bands, including, but not limited to, telecommunications, mobile devices, aerospace, satellite, automotive, radio astronomy and defense.
CST- Computer Simulation Technology AGfounded in 1992, is a market leader in delivering 3D electromagnetic (EM) field simulation tools through a global network of sales and support staff and representatives. CST develops CST STUDIO SUITE, a package of highperformance software for the simulation of EM fields in all frequency bands. Its growing success is based on a combination of leading edge technology, a user-friendly interface and knowledgeable support staff. CST solutions are used by market leaders in a diverse range of industries, including aerospace, automotive, defense, electronics, healthcare and telecommunications. On September 30 2016 CST joined the SIMULIA brand of Dassault Systemes
Dassault Systèmes, the 3DEXPERIENCE Company,is a catalyst for human progress. We provide business and people with collaborative virtual environments to imagine sustainable innovations. By creating 'virtual experience twins' of the real world with our 3DEXPERIENCE platform and applications, our customers push the boundaries of innovation, learning and production.
Product:Antenna Magus
Version:2021.1 version 11.1.0 Professional
Supported Architectures:x64
Website Home Page :www.antennamagus.com
Language:english
System Requirements:PC *
Software Prerequisites:CST Studio Suite 2021 and above
Size:1.8 Gb

Antenna Magus is built for: 64-bit systems running Windows VISTA Business, Windows 7 supporting Service pack 1, Windows 8, Windows 8.1, Windows 10 or Windows Server 2008/2012.