Siemens NX 1973 Build 4301 (NX 1953 Series)

Siemens NX 1973 Build 4301 (NX 1953 Series) - Date: December 2021


Release,PR Number,Description,Application,Function,Sub_Function
1973.43,8483136,Vehicle Packaging:License warning message cannot be terminated,KDA,GENERAL_PACKAGE,VEHICLE_PACKAGE
1973.43,8486657,Cannot Create Planar Mill Operation with Adaptive Milling Pattern Using Tapered,CAM,PLANAR_MILLING,OTHER
1973.43,8488136,"checked-out message box ""read-only"" warning",NXMANAGER,PREFERENCES,ALL
1973.43,9796674,The Part files not able to save in SecurAge network drive,SYSENG,SYSTEM_TOOLS,FILE_MANAGEMENT
1973.43,10007898,PCB Exchange NX - Existing components are recreated,PRINTED_CIRCUIT,PCB_EXCHANGE,ALL
1973.43,10018926,wrong PMI Note in JT file exported from NX1946 (or NX1957) - OK in 12.3 or 10.1,PMI,PLMXML,ALL
1973.43,10025702,"Library Tools are duplicatet under the Machine when they are based on ""Unused It",CAM,TC_MFG,OTHER
1973.43,10038700,Weight calculation deformable part failed,ASSEMBLIES,WEIGHT_MANAGE,ALL
1973.43,10045505,Single sided weld joint only partely created,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10045512,Automatic weld joint only partely created,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10056930,Performance issue: Long calculation time if reverse direction is clicked,CAM,FEATURE_BASED,OTHER
1973.43,10057214,Weld Preparation has no effect no error message,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10068226,The mass of an Assembly does not show the change of an deform component,ASSEMBLIES,WEIGHT_MANAGE,ALL
1973.43,10071350,NX1930 enlarges display of Creo JT flat to screen model view note,TRANSLATORS,PROE_TRANS,PMI
1973.43,10071364,Unable to show the display name of the type attribute in Assembly Navigator,NXMANAGER,ASSEMBLY_NAV,TC_INFO_COLUMN
1973.43,10072276,when opening Creo JTs in NX the PMI is locked in size and position,TRANSLATORS,PROE_TRANS,PMI
1973.43,10076725,Unable to import Iges file in NX1973. Worked fine in previous versions.,TRANSLATOR,IGES,IMPORT_GEOMETRY
1973.43,10079044,Additional Tools are created and Disturb the Customer Workflow,CAM,TC_MFG,OTHER
1973.43,10085756,"NX electrical routing: ""invalid part tag"" error when updating formboard",ROUTING_ELEC,FORMBOARD_V2,UPDATE_FMBD
1973.43,10099242,Weld Preparation not working,KDA,WELD_ASSISTANT,WELD_PREP
1973.43,10101526,Plate Chamfer and Welding Joint not working together,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10101714,"""fatal error detected"" when trying to edit in sync manager",CAM,SYNCHRONIZATION,EDITOR
1973.43,10105663,Synchronization Manager in Cam is not working in NX1980,CAM,SYNCHRONIZATION,EDITOR
1973.43,10106542,Weld Preparation fails on inner corner,KDA,WELD_ASSISTANT,WELD_PREP
1973.43,10115506,Since NX1953 Tooling Pocket Thread Limit is now set to Full length always,KDA,PROGRESSIVE_DIE,POCKET_DESIGN
1973.43,10116832,Shipbuilding dimension very slow in snapping point and placing,SHIP_DESIGN,CONCEPT,MAIN_DIMENSIONS
1973.43,10120419,Slow switching of applications between PCBx and Modeling,PRINTED_CIRCUIT,PCB_EXCHANGE,ALL
1973.43,10127445,Slider collision is occurred while during simulation.,KDA,MOLDWIZARD,TOOLING_MOTION
1973.43,10128968,Structre Welding: No Welding created,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10129030,Weight does not update,ASSEMBLIES,WEIGHT_MANAGE,ALL
1973.43,10134623,TC Revise on a Item Revision with a Promote body at the asm level does not,NXMANAGER,FILE_SAVE_AS,REVISE
1973.43,10139454,Law Curve and divided face failed,DESIGN,EXPRESSION,ALL
1973.43,10142312,Structure Weld Weld Joint Weld Preparation fails on straight brake part,JOIN,ALL,ALL
1973.43,10151185,"Unable to suppress the ""Unit filter option"" in File -> New Dialog",ASSEMBLIES,PART_FILE_OPS,FILE_NEW
1973.43,10151563,Invalid Tag error from menu > Tools > Knowledge Fusion > Application,KDA,KNOW_FUSION,TC_ENGR_IMAN
1973.43,10159281,Bad faces when translating IGES to prt,TRANSLATOR,IGES,GENERAL
1973.43,10162633,Scale being removed from Detail View during Copy/Paste of Drawing sheets,DRAFTING,DRAWING/VIEW,SECTION_VW
1973.43,10163773,Dimension for defining the hole point is not turned into Expression while editin,DESIGN,FEATURE_MODEL,HOLE
1973.43,10172712,Assign Materials dialogue take a long time to open.,CAE,ADV_SIMULATION,MATERIALS
1973.43,10172867,MoldWizard symbolic thread error when changing screw sizes.,KDA,MOLDWIZARD,POCKET_DESIGN
1973.43,10174256,Replace Component with different revision fails due to warning popup,ASSEMBLIES,ASSEMBLY_MODEL,COMP_REPLACE
1973.43,10177002,Internal error: memory access violation - Hole Series fails,DESIGN,FEATURE_MODEL,HOLE
1973.43,10179706,"A tag was passed belonging to an object that could not be found"" error occurs wh",STRUCTURE_DES,MOUNT_FEET,ALL
1973.43,10180155,Sketch (41) cannot be Edited or Renewed,DESIGN,SKETCHER,VTK_SOLVER
1973.43,10183008,Missing Engage/Retract in NX1973 Compare to NX11.0.2.7 MP6,CAM,MULTI_BLADE,BLADE_FINISH
1973.43,10187503,Trying to use NX Formboard Flattening to Flatten a Body harness with three Loops,ROUTING_ELEC,FORMBOARD_V2,CREATE_DRAWING
1973.43,10189393,Unable to load Deviation Gauge analysis results through Information->Object,STUDIO_DESIGN,ANALYZE,DEVIATION
1973.43,10189613,Unable to delete a Drawing Sheet with Internal Error,DESIGN,SKETCHER,VTK_SOLVER
1973.43,10189968,Pedestrian Protection - Wrong Circle Template,KDA,GENERAL_PACKAGE,PEDPRO
1973.43,10190087,Structure Designer Name doesn't follow NamesRecipes.xml,STRUCTURE_DES,APPLICATION,ENVIRONMENT
1973.43,10190773,different equation result by using law curve and expression,DESIGN,EXPRESSION,ALL
1973.43,10195975,"""New sketcher"" dimension colors are dark grey and when changing customer default",DESIGN,SKETCHER,TASKENVIRONMENT
1973.43,10199946,Mass Edit causes tool path to start outside geometry likely causing a crash,CAM,OPERATION,PARALLEL_GEN
1973.43,10206362,Customer Default not working - Display message when Work Part is Read-only,NXMANAGER,PREFERENCES,ALL
1973.43,10207258,Restructure Manufacturing Assembly Encountered unexpected NULL pointer.,SHIP_DESIGN,MANUFACTURING,MFG_PREP
1973.43,10209958,"Customer default - display message when modifying Read-only Parts, not work",NXMANAGER,PREFERENCES,ALL
1973.43,10211972,The Structure for this object is read-only,NXMANAGER,PREFERENCES,ALL
1973.43,10212883,Checked-out: The object is read-only,NXMANAGER,PREFERENCES,ALL
1973.43,10213671,The object is read-only and Object structure is read-only,NXMANAGER,PREFERENCES,ALL
1973.43,10214599,Partially Created Automatic Butt Weld joint,KDA,WELD_ASSISTANT,WELDING_JOINT
1973.43,10214639,Plate Preparation weld Preparation Manufacturing not correct,SHIP_DESIGN,MANUFACTURING,PLATE_PREP
1973.43,10217063,"Automatic Butt weld creation using Preference ""Minimum Body overlap Distance",KDA,WELD_ASSISTANT,WELDING_JOINT



NX Continuous Release

Siemens PLM Softwarebegan delivering its NX software product using a Continuous Release methodology in January 2019. This delivery model gives customers faster access to new enhancements and quality improvements, while reducing the efforts needed to effectively deploy NX. WithNX Continuous Release,upgrading is fast, automated, and seamless. Upgrades with NX Continuous Release is independent of your current version while preserving your existing data - even data back from 1984. Siemens PLM customers in the Continuous Release main channel will see functional improvements every six months with monthly updates. The software updates themselves are smaller, so you no longer need to make large jumps between significant releases.

Siemens becam the first major CAD/CAM/CAE vendorto deliver products in this way. NX is built on a modern software architecture, developed with a business focus on delivering new functionality while protecting customer data.

Experience NX Continuous Release

NX1953: NX TDP Automatic BOM Table enhancements

Siemens Digital Industriesis an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries.

Product:Siemens NX Continuous Release
Version:1973 Build 4301 (NX 1953 Series) *
Supported Architectures:x64
Website Home Page :

www.plm.automation.siemens.com

Languages Supported:multilanguage
System Requirements:PC **
Size:16.9 Gb


Siemens.NX.1973.4301.Win64.Full.Setup.iso
Siemens.NX.1973.4301.Win64.Update.Only.iso