Download now

What's New for Inventor 2024.3

AnyCAD for Inventor
Reference Future (newer) Versions of Inventor Part and Assembly Files
- You can now reference an Inventor 2025 part or assembly file in Inventor 2024.
- You must have Inventor 2024.3 installed to support opening 2025 part and assembly files.
- Use the Open, Place, or Derive command to create a reference to a newer version of an Inventor part or assembly file.
Migration:If you open and save the file in a newer version of Inventor (or use Task Scheduler to migrate files with references to future versions) the newer version references are migrated to standard Inventor Place and Derive relationships.
Translators Updates - Version Support

Model State Enhancement
Use the "Substitute" option from the content menu in the Part Browser node. The Part Browser node reflects the status of the substitute part, and the "Create iPart" command is disabled.


Add-Ins - BIM Translator
- Resolved an issue where subsequent IFC exports resulted in different ✅File Sizes. This fix is dependent on RCE 2023.1.4 and 2024.2.1, with the release date yet to be determined. INVGEN-73116
- It is now possible to delete Revit Category folders from RVT files imported as a Convert model. INVGEN-76106
Add-Ins - 3D Annotations
- Resolved an issue where the Common Zone modifier was missing for the ISO 3D annotation standard. INVGEN-74784
Add-Ins - Content Center
- Improved stability when refreshing Content Center. INVGEN-73392
- It is now possible to create instances from the Content Center, even when there is a space character in the family table column name. INVGEN-75067
Add-Ins - Design Accelerator
- Resolved an issue where the Bolted Connection couldn't drill a hole for some custom Content Center beams or profiles. INVGEN-71509
- Resolved an issue in Bolted Connection where it was not possible to drill a hole when the end face is from an assembly feature. INVGEN-74194
- Resolved an issue with Bolted Connections and blind holes. INVGEN-74212
Add-Ins - Frame Generator
- Resolved an issue with the algorithm that calculates frame length. INVGEN-72232
- Resolved an issue where the preview was not adjusting in the Frame Generator when the size was changed. INVGEN-76292
- Improved stability when a mirrored 3D sketch was selected from the Model Tree using the Insert Frame option, or when hovering over all lines in a 3D sketch. INVGEN-76571
Add-Ins - Simulation - Dynamic Simulation
- Improved performance in Dynamic Simulation after using the Insert Joint command. INVGEN-74843
Add-Ins - Tube and Pipe
- Resolved a Tube and Pipe issue with snapping to points when positioning a hose end. INVGEN-72536
- Improved stability and robustness in Tube and Pipe. INVGEN-73268
- Resolved an issue where End-Point values in the PCF output ISOGEN file were rounded to the same count of decimal places. INVGEN-74473
Add-Ins - iLogic
- Resolved an issue where the iLogic Component object couldn't be used in a rule that runs out-of-process in a Vault project. INVGEN-74802
AnyCAD - Revit
- Resolved error that occurred when importing an RVT to Inventor that contained overlapping geometry. INVGEN-73296
- Improved stability when an RVT file was placed into an assembly from Autodesk Docs, which was uploaded through the Desktop Connector. INVGEN-76324
Application Home
- Resolved an issue where guided tutorials could not be started in sketch mode. INVGEN-69269
Assemblies - Adaptivity-Flexible
- Improved stability when copying a flexible assembly into another assembly. INVGEN-75366
Assemblies - BOM
- Resolved an issue where the physical material of virtual component in iProperties does not update with the change in BoM. INVGEN-67599
- Resolved an issue where iParts properties in an iAssembly are not updated in a parts list. INVGEN-68732
Assemblies - Constraints-Joint-Assemble
- Resolved an issue with the iMate graph not displaying correctly. INVGEN-75897
Assemblies - Derived-Shrinkwrap
- Added the Edit and Accept buttons for handling Simplification errors. INVGEN-69289
- Improved stability when simplifying an assembly. INVGEN-69548
Assemblies - Features-Sketch
- Improved stability when editing a chamfer for a weldment containing legacy welds. INVGEN-72695
Assemblies - Mirror-Copy-Replace
- Improved stability when replacing one sub-assembly with another sub-assembly. INVGEN-74324
- Improved stability after mirroring a frame. INVGEN-74619
Assemblies - Properties
- Resolved an issue where the Update Mass command was still active even after using the assembly features. INVGEN-72046
- Resolved an issue where the 'Update Mass' command was disabled after suppressing a sub-component. INVGEN-72850
Assemblies - Rep Position
- Resolved an issue concerning the width of the Positional Representation drop-down list in the Override dialog box. INVGEN-76077
Assemblies - Weldments
- Resolved an issue where certain display settings affected the color of Cosmetic welds. INVGEN-75046
Design Views
- Resolved an issue where the associativity of view representation did not take effect. INVGEN-75265
- Improved performance when placing the first view of a model. INVGEN-75671
- Resolved an issue where section views could not be created on a body with a deleted face. INVGEN-76248
Drawings - Annotations
- Resolved an issue where entering a Surface Texture Symbol with active Hiragana caused the Majority symbol to collect the symbol twice. INVGEN-72113
- Resolved an issue where existing annotations in the drawing were not updated after changing units for Mass. INVGEN-75342
Drawings - Annotations - Balloon
- Resolved an issue where a balloon cannot be attached to the view of the helix. INVGEN-54152
- Resolved an issue where it wasn't possible to attach a balloon to an iPart in an iAssembly. INVGEN-66590
Electro-Mechanical
- Resolved issue where the electromechanical link was broken after a harness component was renamed. INVGEN-76200
InvConnect
- Resolved issue where a shared view could not be created when access towww.gstatic.comwas blocked. INVGEN-76282
Model States
- Resolved an issue where the Member column in the model state conflicted with a parameter of the same name. INVGEN-71648
- Improved performance of calculating physical properties for the entire assembly, even with suppressed components. INVGEN-74213
- Resolved an issue where the "Update Mass" button remained enabled after clicking, and mass properties were not stored. INVGEN-76365
Model States - API
- Resolved an issue where the "Model State Activated" trigger doesn't work when switching from a Substitute to a model state. INVGEN-65423
Model States - BoM - Partslist
- Resolved an issue in iLogic where checking for property updates doesn't work on sub assemblies. INVGEN-69652
- Resolved an issue where BOM QTY shows an Error. INVGEN-69987
Model States - Substitute
- Resolved an issue where the iMate on the substitute component became erroneous after rebuilding an assembly. INVGEN-73000
Parts
- Improved stability when a corrupted part file was opened. INVGEN-74271
Parts - 3D Sketch
- Improved stability when projecting a sketch onto surface. INVGEN-75845
Parts - Properties
- Resolved an issue with incorrect custom iProperties values. INVGEN-75215
Parts - Derive
- Improved performance when large derived parts were selected up to 10 times. INVGEN-76139
Platform
- Resolved an issue where a transaction started in an API client could not be aborted if there was a document save API call. This required changes in iLogic rules containing such code. INVGEN-67313
- Resolved an issue where drawings could not be saved. INVGEN-72571
- Improved stability when using linked files with parameters. INVGEN-73264
- Improved stability when using a 3D Connexion device. INVGEN-74225
- Resolved an issue where it was not possible to copy/cut and paste between AutoCAD OEM, Inventor, and Inventor OEM. INVGEN-76203
Platform - API
- Resolved an issue where no error was returned when a failure occurred while saving a document via iLogic or the API. INVGEN-75630
Platform - API - Drawing
- Improved performance when opening or editing the Parts List dialog. INVGEN-75902
Presentations
- Resolved an issue where it was not possible to delete the snapshot view from the presentation file. INVGEN-73703
Translators
- Resolved an issue where part containing square hole rectangular patterns couldn't be exported to the RFA file. INVGEN-69495
- Resolved an issue with incorrect properties in the exported JT file. INVGEN-72809
- Resolved an issue where a prefix or suffix was not applied when the Enter key was used for various import dialogs. INVGEN-76009
UI - Browser
- Improved stability when reordering features in the Model Browser. INVGEN-74099
Autodesk Inventoris a professional grade design and engineering software. It is a complete solution for 3D mechanical design, simulation and automating design workflows as well as every day repetitive tasks that help you to make great products cost-effectively, in less time. With Inventor Professional, you can easily integrate AutoCAD and 3D data into a single digital model to create a virtual representation of the final product. Inventor Professional helps you realise the benefits of 3D product development by providing an associative link to native DWG files to ensure accuracy in your design. Inventor takes you beyond 3D to Digital Prototyping by enabling you to produce an accurate 3D model that can help you design, visualise, and simulate your products before they are built. CAD productivity and design communication tools can help you reduce errors, communicate more effectively, and deliver more innovative product designs faster.
Autodesk's key focuses within theInventor Professional 2024release are to improve performance, automation, and core modelling workflows.
Autodesk Inventor 2024 | New Features
In this video, our Application Specialist Jason Kelly will take you through some of the new features within Autodesk Inventor 2024.
Autodeskhelps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.