Autodesk Vault Product 2025.1 Update Win x64

Autodeskhas releasedVault Products 2025.1. This release ready to deliver enhancements that will enable you to accelerate your overall design creation and data management experience.
2025.1 Update - Known Issues
Client
- Get command freezes when dwg files is downloaded from project sync. PDM-42859
- DWF generation fails for some Revit files from Vault client. PDM-44143
Copy Design
- Destination path column not populated with destination name during copy branch operation. PDM-43914
Data Standards
- Inventor crash observed when publishing Factory Design Utility assets 2nd time and when Vault Data Standard is enabled. PDM-43607

Add-ins: Inventor
- Resolved an issue where the Revision Table was incorrect after a purge of the released version with the first and last. PDM-42520
- Improved the performance of open from Vault action from Inventor add-in done from a folder which has attachments in it. PDM-43209
- Resolved an issue where the Inventor would crash if users canceled the placement of a base view of a drawing while Vault was loaded. PDM-39713
- Resolved the issue with related files not getting deleted from local, when referenced file has 'Close file and delete working copies' option selected. PDM-42482
- Resolved issue where Inventor crashes when Vault Diagnostic logging is turned on and Factory Add-In is loaded. PDM-43055
- Resolved issue where the Content Center wasn't allowing read-only access. PDM-44015
- Resolved the issue with Inventor crash during saving an assembly while its child part has a component changed. PDM-42851
- Improved performance of switching model states for specific dataset. PDM-43260
- Resolved issue where the property 'ThisApplication.ActiveDocument.File.ReferencedFileDescriptors' was not accurate after updating 'document.FullFileName' during an 'OnSaveDocument' event for Inventor Vault project. PDM-39794
- Resolved the issue where BOM is cleared from an assembly item/BOM after migrating the assembly through task scheduler. PDM-42636
Add-ins: Revit
- Resolved an issue where the Revit failed to link the IFC file from Vault. PDM-41385
- Resolved the issue with linked Revit file getting unloaded when synchronizing properties with Vault. PDM-26329
Administration
- Resolved an issue where Error 303 message is seen when trying to access a group as group manager. PDM-43724
Autoloader
- Resolved issue where Autoloader could not validate files when using ipt with stp files. PDM-43296
Behaviors
- Resolved an issue where the rollback command couldn't revert to the previous status when the lifecycle status control was set to "none". PDM-42490
- Resolved issue where property value cannot be modified if the property name is same as ECO link property name. PDM-26670
- Resolved issue where Rule Criteria of Item Category does not work correctly, when file type property is used as the rule condition. PDM-30191
- Resolved issue where Inventor drawings in library folder are not excluded in change state action in Vault. PDM-41552
Client
- Resolved issue where shortcuts are collapsed when vault client is refreshed. PDM-42626
- Resolved issue when Get command downloads CAD data locally in Vault Office PDM-42499
- Resolved issue where 'View in Window' feature cannot be used for large assembly files in the Vault Office. PDM-42483
- Resolved issue where Category Glyph has wrong color in German environment. PDM-41571
- Resolved issue with Thumbnails not seen in the Document Browser in Vault client. PDM-43350
- Resolved issue where flat pattern DXF publish was not using drawing configuration file. PDM-41755
- Resolved issue with Change state dialog changing position more and more to the bottom. PDM-26375
- Resolved issue with filtering Category Assignment Rules with a search resulting in incorrect information. PDM-43656
- Improved the search performance in Vault caused by adding, removing, or changing a value of a folder property. PDM-35375
- Resolved issue where attempting to modify a distributed search in Vault resulted in the error "String was not recognized as a valid DateTime". PDM-43213
- Resolved issue where the Get dialog does not show the latest version of the file. PDM-42718
- Resolved issue with list being incomplete, when Vault search results are pasted into Excel. PDM-41851
- Resolved the issue where vault client was crashing when a windows error is closed. PDM-41810
- Resolved issue where Customized toolbar is not saved in Job Queue View. PDM-43729
- Resolved issue where renamed folder in Vault had incorrect value for 'Create Date' property. PDM-36396
- Resolved issue when user can to download CAD data locally in Vault Office using "Open Drawing" command. PDM-42500
- Resolved an issue where the instance of Saved Search would duplicate when moved to a group within the Inventor/AutoCAD add-in. PDM-43033
- Resolved issue where Creo files can not be viewed in Vault via Autodesk Viewer. PDM-40373
- Resolved issue where Saved Searches can not be moved out from the groups in Inventor and AutoCAD add-ins. PDM-43037
- Resolved issue where '&' sign is not shown in workspace location when using it in the workspace. PDM-42865
- Resolved issue where the groups of Saved Search cannot be deleted in Inventor and ACAD add-ins. PDM-43036
Client: Performance
- Resolved an issue where Workspace sync ends up with an empty list PDM-43257
Copy Design
- Resolved issue where Copy Design Model State check provided no user feedback, leaving the user confused and without indication of ongoing progress PDM-42427
- Resolved issue where Copy Design displays warning message: "Some properties could not be updated", when run on AutoCAD files configured with multiple block attributes mapped to a single user defined property in Vault. PDM-43298
Items
- Resolved the issue where Assign/update item command changes value of a BOM property, which is not mapped, back to initial value. PDM-43066
- Resolved the issue where save item command brings back one of the deleted file links. PDM-27998
- Resolved the issue where the idw file is not linked to item, if it is creating from ipn file. PDM-43820
- Resolved the issue with security of item created using 'Import Items' command is not "State-based security". PDM-26643
Job Processor
- Resolved issue where submitting jobs for various versions of the same file resulted in wrong version numbers being displayed in the job queue. PDM-42135
- Resolved issue with Vault Job Processor falls back to default naming if property value is empty. PDM-42748
- Resolved issue where job extractbom.Inventor stops working after a DWF job has been executed on the Job Processor. PDM-42229
- Resolved issue where publishing a DWF from nwf (Navisworks) would result in the error message "It looks like an error occurred during file export." PDM-43259
- Resolved issue where step files created through Vault job are missing assembly components that are located in library PDM-43262
Properties
- Resolved issue where "Equivalence Error" is seen for number type property in Vault for Inventor files. PDM-40353
Revision Block
- Resolved an issue where revision table is not updated when the file has no revision at all. PDM-39200
Server
- Resolved issue where Vault would not fully index PDF files. PDM-42788
- Resolved the issue with incremental backup not restoring all vaults properly. PDM-42728
- Improved the warning message when a property's list value constraint is updated in Vault settings. PDM-41459
- Resolved an issue in replication environment, where ADMS crashes when a non-replicated Vault is 'Enabled' from the subscriber. PDM-38056
- Resolved issue where checkin command failed due to VC2012 runtime dependency. PDM-43256
- Resolved the error with upgrading 2022 workgroup replication to 2024 when trying to replicate new vault. PDM-43635
- Resolved an issue where the server tasks are inconsistent when disabling from subscriber in a replicated environment. PDM-43476
- Resolved the issue with rebuild search index error in replication environment. PDM-43031
Thin Client
- Resolved the issue with sorting of Version column in thin client not working as expected. PDM-42858
Viewer
- Resolved the issue with viewer not loading properly for certain Inventor assembly files. PDM-41066
- Resolved issue with missing data while viewing an Inventor drawing file with an associated DWFx file. PDM-41117
- Resolved issue where Markups are not resetting the section view when switching between markups. PDM-42200
Autodesk Vaultdata management software, part of the Autodesk solution for Digital Prototyping, helps you organize, manage, and track design, engineering, and simulation data and documentation. Get more control over your designs with revision management capabilities and quickly find and reuse data for better management of your design and engineering projects. Whether your team sits in the same office or across multiple sites, Autodesk Vault helps you collaborate more effectively and share information with other departments, maximizing your design data value.
Autodesk Vault 2025 What's New - Overview
Autodesk Vault 2025 is ready to deliver enhancements that will enable you to accelerate your overall design creation and data management experience.
Autodeskhelps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.