AVEVA PRO/II Simulation 2024.0.1 Win x64 English

Important Notes for v2024.0.1 (Patch 1)
- 3067267: Cannot migrate model from v2023 to v2024
If the first four characters of the card in any unit operation match the first four characters of the unit operation type (which is CALCULATOR in this case), and if CALCULATOR is followed by an EMISSION unit operation during import, then this CALC will be treated as a card of the EMISSION unit operation instead of a new unit operation called CALCULATOR. As a result, the import process fails, and the following impact applies to files migrated from older versions:
. Migration By Keyword: Import fails.
. Migration By Schema: No Impact.
- 3061271: The exit, entrance, and tee pipe devices appear to utilize a homogeneous two-phase multiplier instead of the selected Chisholm method. Even when the Chisholm method was chosen, the homogeneous model was still applied. To resolve this issue, a simulation repair is necessary before running.
- New spline curve fit methods added in the Compressor unit operation.
- New convergence options are added in the CSTR unit operation.
- Support for MySep 3.1.2 added.
- Support for PIPEPHASE 2023 added.
- Support for CMR0A and CMR0P random packings added in the Column unit operation.
Defects corrected in v2024.0.1 (Patch 1)
3236230 ACE HTRI license check to include Xace along with Xist
3296862 Calculator Calculator does not update TVP when temperature basis is changed
3057654 Cape-Open HTRI Cape-Open dat file doesn't get containerized with just import but not saving prz in standard and Exxon versions
3066117 Column PROII crashes after column Description generation and rerun for a specific case
3188938 Depressuring Initial depressure stream (at time=0) is liquid from mixed phase initial hold-up
3278875 File Crash / adding product/pseudo product stream with a certain model
2354139 Flash Freezing temperature calculated with Flash drum "solid formation" option does not match the expected or alternatively calculated temperature value
3036365 Flash Discontinuity in vapour fraction & loss of liquid 1 with SRKKD
3250326 HXRIG PRO/II gives an error when "over fin diameter" and "Tube OD" are provided for XACE in HTRI for high fin type where it should not
3029133 LNGHX Adding (or deleting and re-adding) a LNGHX into a model causes a 2** ABORT *** ENTRY NUMBER NEGATIVE OR ZERO" error
3067267 Migration (AVEVA) Cannot migrate model from v2023 to v2024
3260861 OLI PROII 2024 installation creates OLI errors with previous PRO/II versions installed
3013551 Pipe Elevation changes not considered in pipe pressure drop calculation
3061271 Pipe Exit, entrance, and tee pipe devices seem to use homogenous 2 phase multiplier rather than the selected Chisholm method
3073010 Reactions Reaction order getting reset Yes
3342479 Refinery Reactors Multiple instances of the HDP open the second instance will fail with an error on license 574
3243737 SPYRO Incorrect component mapping between PRO/II 2024 and SPYRO
3283396 Stream Calculator File that converges in 10.1 hangs at stream calculator in 2022 and later
3348086 UI Units of Measure remains red in a particular scenario
3300483 Valve Issue with vapor pressure used in calculation of valve critical pressure drop with an incompressible fluid

AVEVA PRO/II Simulationis a professional simulation tool that offers a comprehensive simulation solution for process design, revamp, and operational analysis. AVEVA PRO/II Simulation performs rigorous mass and energy balances for processes ranging from oil and gas separation to reactive distillation. AVEVA PRO/II Simulation has the power and flexibility to simulate a wide range of processes at steady state, from refining to chemicals. AVEVA PRO/II Simulation provides robust and accurate results based on industry-standard thermodynamic methods and physical property data. AVEVA PRO/II Simulation is a valuable tool allowing engineers and management to enhance the bottom line of their process or plant.
Aveva Pro-II Process Engineering
AVEVAis a global leader in engineering and industrial software driving digital transformation across the entire asset and operations life cycle of capital-intensive industries. The company's engineering, planning and operations, asset performance, and monitoring and control solutions deliver proven results to over 16,000 customers across the globe. Its customers are supported by the largest industrial software ecosystem, including 4,200 partners and 5,700 certified developers. AVEVA is headquartered in Cambridge, UK, with over 4,400 employees at 80 locations in over 40 countries.