Udemy - MikroTik Routing Engineer with LABS

What you'll learn
Understand Static and default Routes
Understand the more specific routes on static routes
Understand and configure ECMP
Understand route distance
Understand the difference between FIB and RIB tables
Understand and configure Routing mark and route policy
Understand and configure Recursive routes with scope/target-scope usage
Understand what VPN is and the different types of VPN
Understand and configure the follow tunnels: IPIP, EoIP, PPTP, SSTP, L2TP, PPPoE
Understand what is VLAN and how to use it
Configuring VLAN
Understand and configure Q-in-Q
Understand what is Link-state Routing Protocol
Understand what is OSPF Routing Protocol
Understand how OSPF use SPF algorithm for calculating the best route
Understand how OSPF works
Understand OSPF hello packets and LSA's types
Understand the OSPF network structure such as Areas and Router Types
Understand the need of DR/BDR election and configure them in OSPF
Understand and configure External router distribution (Type1, Type2)
Understand and configure load balancing on OSPF
Understand and configure Router aggregation on OSPF
Understand and configure stub areas (Stub, Totally Stub, NSSA, Totally NSSA)
Understand and configure Virtual links in OSPF
Requirements
Having MikroTik MTCNA knowledge
Description
***This course is not officially sponsored by MikroTik and not an authorized course by MikroTik. We are neither affiliated with nor endorsed by MikroTik. We respect the Trademarks of the mentioned company and institution.***
MikroTik MTCRE is at the 2nd level certificate from MikroTik, and it is considered in the Engineering level. This course will speak about everything related to Routing at the Intermediate level. Being MikroTik MTCRE certified is a prerequisite for the higher level Routing certificate which is MTCINE
For this reason, I have designed this course to help you understanding how Routing happens in MikroTik and be read for the MikroTik MTCRE exam.
This course will contain theories but a lot of LABS. For this reason, if you want to follow this course I advice you to have 1 PC and 5 or MikroTik Routers with UTP Cables. Alternatively, you can use MikroTik CHR on GNS3 to emulate the LABS, and which GNS3 you don't require any physical Routerboards as all LABS can be done on GNS3
In this course, you will learn the following topics:
More specific routes
ECMP
How to force gateway over specific interface
Gateway reachability check and route distance
Routing mark and route policy
Recursive next-hop and scope/target-scope usage
What is OSPF?
How OSPF protocol works
Hello protocol
Database distribution and LSA types explained
OSPF network structure
Areas
Router types
OSPF neighbors and neighbor states (DR and BDR election)
External Route Distribution methods (type1, type2)
Interface cost and interface types (broadcast, NBMA, etc.)
SPT calculation algorithm
OSPF and multicast (problems with NBMA)
Stub, NSSA and area ranges (route aggregation)
Virtual links, usage and limitations
SPF routing filters and limitations
What is VPN?
Different types of VPN
Site to site connectivity with tunnels
IPIP, EoIP, PPTP, SSTP, L2TP, PPPoE
VLAN and it's usage
VLAN and managed switch
VLAN and switch chip configuration on RouterBOARDs
Q-in-Q implementation
As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. A lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
Finally, if you want to have a global understanding of all MTCRE topics and be ready for the MTCRE exam, all you need to do is to register to my course and I assure that your goal will be achieved.
Who this course is for:
Students who want to learn and be ready for the MikroTik MTCRE exam
Engineers who want to have more knowledge on Routing in MikroTik

Homepage

https://www.udemy.com/course/mikrotik-routing-engineer-with-labs-mtcre/