Udemy - STM32 Getting Started - Level2- HAL Library

What you'll learn:
STM32 Programming Fundamentals
HAL Library programming
Minimum STM32 Project setup
Printf Terminal
Digital I/O
4-digits display
Analog Inputs ADC - All common modes
Serial Communication UART
I2C interface
SPI interface
TIM - PWM Output
TIM - Encoder Mode
TIM - Output Compare
External Interrupt
RTC - Realtime Clock
CRC - Cyclic Redundancy Checksum
Low Power Modes - Sleep, Stop and Standby
FLASH programming
SD Card File System
USB MSC Device - SD Card
FreeRTOS Setup
Requirements
STM32F1 Starter Kit or equivalent
C Programming
Some Electronics Knowledge
Recommended - To first complete Getting Started Level1 Register Level course
Description
The STM32F1 Getting Started - HAL course aims at exploring the HAL library in depth without the use of CubeMX for code generation to make student or engineers appreciate and understand the peripherals configuration process and structure within the HAL library. The ability to generate initialization code manually using HAL library directly is very useful skill in the toolset of Embedded Engineers and Students, Complex STM32 Projects are often built without CubeMX. It is the professional STM32 programmer's choice in industry, especially for large software projects where complex middleware needs to be integrated that CubeMX does not support.
Who this course is for
Junior STM32 Embedded Systems Engineers who seek to obtain the core fundamental skills for long-term success in the Embedded Industry
STM32 Embedded Systems Students who want to go beyond their lecture notes and get their hand on fundamental programming skills and practical examples
Generally anyone who started STM32 programming but feels missing some core fundamental skills
Absolute beginners
Homepage
https://www.udemy.com/course/stm32-getting-started-level2-hal-library/