Udemy - Learn Mitsubishi PLC Programming from Scratch just in 2hours

What you'll learn
Understand how a Programmable Logic Controller (PLC) works
Pass a technical PLC interview
Understand how to program a PLC
Learn Ladder Logic Programming
Industrial Automation
GX Developer
Requirements
Basic Electrical Hardware Understanding
PLC Software (Included in the Course)
Description
This is a comprehensive course for learning the basic level programing of Mitsubishi PLC in GX Developer software. You will learn the logic designing of GX Developer from scratch in a short period. No hardware equipment will be required to follow the course you will just have to install GX Developer software on you PC and you can do it. Fundamental programming of GX Developer will be covered step by step including the video lectures and solved examples.
Course Outline
1. PLC Wiring
Inputs, Outputs
Power Supply
Sink Source
Ethernet Communication
NPN & PNP Sensors
2. How to Use GX Developer Software
How to Launch Software
How to Create a New Program
Normally Open Contacts
Normally Close Contacts
Output Coil
Positive Pulse/Rising Edge Operand
Negative Pulse/Falling Edge Operand
How to Download the Program into PLC
How to Read a Program from PLC
3. Latching
How to Latch an Output Using a Memory Bit
How to Latch an Output Using Set and Reset Commands
4. Interlocking of Motors
5. Internal Memory or Relay and Latched Internal Memory
6. Timers
On Delay Timer
* Enable of Timer
* Specifying the Duration of Time
* Resetting a Timer
Off-Delay Timer
Retentive On-Delay Timer
7. Counters
Up Counter
* Resetting a Counter
Down Counter
Up-Down-Counters
8. Registers
How to Initialize Registers
How to Write Values in Registers
How to Move the Values of Registers
How to Use Register with Timers and Counters
9. Arithmetic Operations
Addition
Subtraction
Multiplication
Division
10. Compare Command
Equal (=)
Less Than (>)
Greater Than (<)
11. Examples Using AND, OR Gates
Who this course is for
Anyone interested in learning how an industrial process works
Electrical Engineers
Production, Maintenance & Electrical Technicians
Homepage

https://www.udemy.com/course/mitsubishi-plc-in-2hours/