Huawei MPLS Services with Theory and 8 Labs

What you'll learn
Understanding MPLS Network and its components
Configure and Establish an MPLS Network using Huawei Routers
Understand L3VPN and L2VPN services
Configure and Provide L3VPN and L2VPN services to customers
Configure MP-BGP between PE routers
Understand and configure Multi-chassis LAG (E-trunk) to support PE routers redundancy
Provide L2VPN Redundancy and perform failover Test between master and backup nodes
Understand Virtual Private LAN Service (VPLS)
Configure VPLS service to connect multiple of customer sites with different types of Signalling (LDP or BGP)
Understand what the MPLS Traffic Engineering Tunnels are
Know how the MPLS Traffic Engineering Tunnels can be established through the service provider network
Configure MPLS Traffic Engineering Tunnels
Understand different ways to forward services traffic (L3VPN / L2VPN) over MPLS TE Tunnels
Requirements
Good understanding of Networking Basics
Good IP addressing knowledge
Know how to configure routers using CLI
Good IP Routing Knowledge (Static, OSPF, BGP)
Description
Multi-Protocol Label Switching (MPLS) is one of the most interesting and hot topics in Service Provider and Telecom world, the course will introduce MPLS basics, fundamentals, definition, MPLS services (L3VPN and L2VPN - PWE3 / VPLS) and MPLS Traffic Engineering. The course is presented in 4 hours in English with video lectures in presentation slides to explain the theory of MPLS and its services plus applying them in practise labs. The course focuses on hands-on labs (provided in videos ) over Huawei vendor (using eNSP simulator as the lab tool) with 26 lectures.
Upon completing the course, you will be familiar with what the MPLS Network is, its components, and MPLS Architecture, how the MPLS Network operates, understand L3VPN technology with its terminologies, understand L2VPN (PWE3 and VPLS), MPLS Traffic Engineering technology and its terminologies.
Eight labs are provided in this course (Configuring MPLS, Configuring L3VPN Service, Configuring L2VPN (PWE3) service, PWE3 Redundancy with failover test, Configuring VPLS service, Configuring MPLS TE tunnels and TE tunnel policy for forwarding traffic). Basic configuration files are attached and available in the course materials section, plus all configuration files used in the four labs are attached as well. You will be familiar to configure OSPF, MPLS, LDP, L3VPN instances, MP-BGP, and PWE3 on Huawei Routers, plus verifying their configuration.
The course includes three quizzes and one assignment to test your knowledge upon completing each section, and upon completing the course entirely.
Who this course is for
Network Engineers
IP Mobile Backhaul Engineers
Huawei IP Datacom Engineers

Homepage

https://www.udemy.com/course/implementing-mpls-services-for-huawei-routers/