Programming Siemens S7-1200 PLC & KTP 400 HMI device

What you'll learn
You will learn programming Siemens S7-1200 PLC Hardware and HMI Designing from Scratch
You will learn how to convert standard circuits to PLC Circuits
You will Learn fundamentals commands of Siemens S7-1200 in TIA
You will learn how to interface KDP 400 HIM display with S7-1200 and TIA PLCSIM S7-1200
Students will perform industrial automation applications with Factory I/O
You do not need to have hardware or software to practice working with those elements are provided in the videos
Requirements
Basic Fundamentals of Electronics and electricity
Eagerness to learn how to program a typical PLC
Description
in this course you will learn from scratch how to become a PLC code programmer. This course is specifically for the people who want to start their training in Siemens SIMATIC S7-1200 PLC & and a typical HMI (Human Machine Interface) device. We are using Siemens S7-1200 PLC and KTP 400 HMI along with Siemens TIA- Total Integrated Automation software for making all these tutorial videos. The videos are all high-quality video tutorials.
We are teaching programming in Ladder Logic with a touch of FBD- Functional block Diagram. Later in the HMI section, we have interfaced Siemens S7-1200 PLC with HMI to learn monitoring and control of PLC parameters.
Following is the pattern of the course
Introduction to Siemens SIMATIC S7-1200 PLC Hardware and wiring & how it executes a Ladder Logic program?
Introduction to TIA PORTAL virtual software and its configuration
Introduction to Siemens S7-1200 TIA Portal simulator
Next about thirty carefully designed lectures show you how to use TIA instructions properly with excellent meaningful tutorial examples
about eight carefully designed lectures show you how to configure and design screens on the KTP400 HMI device
In most of lectures you will exposed to the usage of Factory I/O Industrial Application Examples in real 3D Dynamics environment
Introduction to S7-1200 analog I/O signals and modules using the Factory I/O to demonstrate how Analog IO signals can be handled
The three last lectures show you what an on/off and PID controllers are and how they can be programmed by the TIA
After learning this course, you would be able to use TIA to program Siemens PLC and HMI in your project or industrial applications.
Who this course is for
Engineering Students
Eagerness to learn how to program a typical PLC
Homepage

https://www.udemy.com/course/programming-siemens-s7-1200-plc-ktp-400-hmi-device/