Introduction to process control and instrumentation

What you'll learn
Learn the essentials of process control and instrumentation for a successful career in process industries
Understand the main terms and parameters of process control (Process variable PV, Set point SP, Operating point OP, Error, Offset, Load disturbance...)
Identify the different control loops and describe their main tasks
Describe the basic function and method of operation for the main control loop components (Transducer, Converter, Transmitter, Indicator, Recorder, Controller...)
Given a piping and instrumentation drawing (P&ID), correctly identify, interpret and label the instrument, location and signal type symbols
Differentiate between discrete, multistep, and continuous controllers
Describe the general goal of controller tuning
Describe the basic mechanism, advantages and disadvantages of the following mode of controller action : Proportional, Integral and Derivative
Identify the basic implementation of P, PI and PID control in the following types of loops : Pressure, Flow, Level and Temperature loops
Differentiate feedback and feedforward control loops
Diagram the process control loop using ISA symbology
Explain the basic implementation process for each of the following types of control : Cascade, Split range , Batch, Ratio and Selective controls
Understand through extensive 3D animation the techniques and methods used in process industries to measure temperature, pressure, flow and level
Requirements
Some engineering or field knowledge is preferable but not mandatory. All the concepts are explained in depth using an easy to understand language to allow students to build their knowledge from the ground up
Description
Dear student,
Control in process industries refers to the regulation of all aspects of the process. Precise control of level, temperature, pressure and flow is important in many process applications.
This course introduces you to control in process industries, explains why control is important, identifies different ways in which precise control is ensured and illustrates the different set of instrumentation used to perform measuring tasks for temperature, pressure, flow and level.
The course includes extensive graphics, cut sections, process schemes and 3D animations to give you a virtual practical exposure on process control and instrumentation.
The objective of this course is twofold
1. Break down for you all the process control and instrumentation principles into easily digestible concepts like feedback control, split range, controller tuning, transmitters, differential pressure gauges, etc...
2. Illustrate through 3D animations and cut-sections the main control instrument devices to measure temperature, pressure, flow and level like thermocouples, capacitive pressure gauges, coriolis flowmeters, etc...
As you proceed through the course, answer the questions in the attached pdf quiz files. These files are available at the end of each section.
We strongly advise you to do so before moving on in the course. Quiz exercises help you measure your progress toward meeting each section's learning objectives.
If you pass, wonderful. If not, you can review the videos and notes again or ask us for help in the Q&A section.
So with no further ado, check out the free preview videos and the curriculum and we look forward to see you in the first section.
Also remember, as enrolled student you will have unlimited access to this material and one-on-one instructor support. So feel free to interact with us by email or simply ask us for help in the Q&A section. It will be our pleasure to help you and provide assistance.
Hope to see you there
Cheers,
WR Training
Spread the wings of your knowledge
Who this course is for
Personnel needing to learn the essentials of process control and instrumentation
Control, Process, Chemical and Design Engineers
Operation, technical service and maintenance professionals
Experienced personnel as a refresher course and to broaden their knowledge
Consultants and Sales professionals
Homepage

https://www.udemy.com/course/introduction-to-process-control-and-instrumentation/