Aspen Plus - Basic Process Modeling

What you'll learn
Model basic chemical processes
Simulate basic industrial processes
Understand the concept of Flowsheet and Manipulate it
Set up the required/basic inputs for a Simulation
Choose the most adequate Method for Physical Properties Modeling
Be able to model the most important/used Unit Operations
Modify all reporting results in order to make analysis
Requirements
Chemical Engineering Basics
Elementary Principles of Plant Operation/Design (Recommended)
Aspen Plus (Version 7 at least)
Description
The BASIC Aspen Plus Course will show you how to model and simulate Processes (From Petrochemical, to Ammonia Synthesis and Polymerisation).
Analysis of Unit Operation will help you in order to optimise the Chemical Plant.
This is helpful for students, teachers, engineers and researchers in the area of R&D and Plant Design/Operation.
The course is didactic, with a lot of applied theory and Workshops/Study cases.
At the end of the course you will be able to setup a simulation, run it, get results and more important, analysis of the process for further optimisation.
Overview
Section 1: Introduction to Process Modeling!
Lecture 1 Welcome to the Course!
Lecture 2 Why Simulate/Modeling Processes?
Lecture 3 Slideshows and other Resources
Lecture 4 Join the Aspen Plus & HYSYS Forum (Unofficial)
Section 2: Course Objectives
Lecture 5 Content (INDEX)
Lecture 6 Course Objectives
Section 3: Introduction to Aspen Plus
Lecture 7 About the different Softwares for Process Modeling
Lecture 8 About Aspen Plus
Section 4: User Interface + Getting Help
Lecture 9 Introduction to Aspen Plus Graphical User Interface
Lecture 10 Starting Page - New, Open, Extensions, Templates Overview
Lecture 11 Landing Page
Lecture 12 File Extensions & Templates
Lecture 13 What is an Environment?
Lecture 14 Aspen Plus - Physical Property Environment
Lecture 15 Simulation Environment
Lecture 16 Aspen Plus - the Simulation Environment
Lecture 17 Getting Help
Lecture 18 Aspen Plus - Getting Help
Section 5: Physical Properties
Lecture 19 Introduction to the Physical Property Environment
Lecture 20 Setting up your Universe
Lecture 21 Method & Method Assistant
Lecture 22 Filling up the Physical Properties Environment
Lecture 23 Physical Property Environment Closure
Section 6: Introduction to the Flowsheet
Lecture 24 Introduction to the Simulation environment & Flowsheet
Lecture 25 Running the Simulation & Results
Lecture 26 Simulation Flow
Lecture 27 Basic Results and Analysis
Lecture 28 Flowsheet Closure
Section 7: Unit Operations and its Models
Lecture 29 Overview of the Section - Unit Operation Blocks
Lecture 30 Introduction to Unit Operations
Lecture 31 Unit Operations in Aspen Plus
Lecture 32 Mixers/Splitter
Lecture 33 Exercise: Mixers/splitters
Lecture 34 Separators
Lecture 35 Exercise: Separators - Flash2 & Flash3
Lecture 36 Exchangers
Lecture 37 Exercise: Exchanger - Heater
Lecture 38 Columns
Lecture 39 Exercise: Columns - RadFrac
Lecture 40 Reactors
Lecture 41 Exercise: Reactors - RStoic
Lecture 42 Pressure Changers
Lecture 43 Exercise: Pressure Changer - Pump
Lecture 44 Unit Operations Wrap-up
Section 8: Basic Reporting
Lecture 45 Introduction to Basic Reporting Section
Lecture 46 Introduction to Reporting
Lecture 47 Table Reports
Section 9: Worked Case Study
Lecture 48 Introduction to the Case Studies
Lecture 49 Case Study I: Statement
Lecture 50 Case Study I: Solvent Recovery
Lecture 51 ERRATA - Solvent Recovery Case
Lecture 52 Case Study II: Statement
Lecture 53 Case Study II: Cumene Production
Lecture 54 Case Study III: Statement
Lecture 55 Case Study III: Gas Compression
Section 10: Individual Case Study
Lecture 56 Introduction to the Individual Case Study
Lecture 57 Case Study IV - Petroleum Fractionation
Section 11: 10. Course Conclusion
Lecture 58 Closure
Lecture 59 Conclusion
Lecture 60 Thank you!
Section 12: Bonus & Surprises!
Lecture 61 The BONUS!
Lecture 62 More Courses!
Chemical Engineers,Process Engineers,Students related to engineering fields,Teachers willing to learn more about process simulation,Petrochemical Engineers,Upstream / Downstream Engineers


Homepage

https://www.udemy.com/course/aspen-plus-process-modeling/