Bim Generative Design For Buildings Dynamo 2.0 And Refinery

Learn and review practical BIM uses of generative design for construction buildings.
What you'll learn
Develop some sample scripts with some requirements to be follow by dynamo
Learn to recognize key values to be compare and to use as permutations for different type of results.
Review relations and interactions of the content display with Dynamo and Revit.
Add valuable information to Models and test them
Requirements
A Computer to accomplish the recommended exercises
Need to install a Dynamo 2.0.2, Project Refinery and Autodesk Revit 2018
Need to know or have taken Dynamo Geometry Modeling and Dynamo Analysis
Description
This course was redesigned to teach you some proposals for a practical BIM use of Generative Design, so it can clearly become a tool asset for the design approach. BIM is now on a second digital revolution where communication skills and programming would create a different value to construction and infrastructure BIM projects, the core stream would be reflected in responses and computer analysis rather than handmade models.
This course its the first step to use Generative Design with Dynamo.
We will start from scratch and review processes proposed to create alternatives and also the models surrounding those, so that all information and their own variables would reflect the analysis and the alternatives we want to set.
On this course we will ground concepts for a practical use so we can communicate with the computer and its capabilities would reflect those results.
Communication is the core competence require for a fluent BIM Coordination, and I do believe that generative design would shorten and improve the BIM adotion rate on design processes, so we are talking on a quantum leap to coordinate with construction and engineering systems.
Decision taking and Dynamic modeling are the two main components of this course.
This course complements with other courses such as Dynamo Basic Modeling, Mastering Geometry with Dynamo, and it will also set a new requirement for future courses using generative design with other workflows.
The course has 1 sample model to follow up so then you can do your own, but it includes all references, scripts and sample values reflected.
Go at your own pace, jump between sections and enjoy a lifetime access of content
Also, we have a direct response for any topic listed, so we can improve the content.
Be the first to know of future courses regarding BIM, take advantage of all the opportunities that may appear and use it to improve your work performance and get better job positions.
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 What is Generative Design
Lecture 3 Resources
Section 2: Using Refinery Dynamo and Revit Together
Lecture 4 Initial Setup and Change from Fractal to Refinery
Lecture 5 Getting total Cost Per Square Meter
Lecture 6 Setting Perimeter Conditions and Initial Nodes
Lecture 7 First Refinery Run
Section 3: Generative Design with Typology of Spaces.
Lecture 8 Parking Conditions by Sellable Space
Lecture 9 08_Splitting Levels by Square Meters
Lecture 10 Phyton Functions
Lecture 11 Setting Volumes and Colors
Lecture 12 Cost Analysis
Lecture 13 Run on Refinery
Section 4: Generative design substracting density and opening distribution.
Lecture 14 Separate Blocks
Lecture 15 Create Cuboids with Colors
Lecture 16 Cleaning the Code
Lecture 17 Other Refinery Samples
Designers, Urban Developers, and Engineers that what to review proposals for a practical BIM use of generative design that they can follow or configure on their everyday basis.,Architects that want to pair up with computers and programing skills to have superpowers when analyzing.,Constructors and Engineers that want to see deeply samples of generative design with Dynamo and may get new ideas on how to implement their own protocols.


Homepage

https://www.udemy.com/course/generative-dynamo-01/