Mastering Work Measurement Techniques And Applications

Ideal course for learning and upgrading skills in Methods Study, Time Study, Work Sampling, PMTS and Making Standards.
What you'll learn
You would learn the scope and objectives of Methods Study and Work Measurement.
You would learn the Methods Study techniques and how to perfect the method.
You would learn how to prepare time study sheets and do Stop Watch Time Study.
You would learn the concept and method of doing Work Sampling Study..
You would learn the concept and method of doing Pre-determined motion Time systems.
You would understand how to make effective use of Standards in designing incentive schemes, manpower planning, Production Planning, assembly line balancing.
You would learn monitoring performance through the use of production norms.
Requirements
Preferably should have working knowledge in a plant and a basic knowledge of Engineering.
Description
This course shall teach the concepts and techniques of Work Measurement, which broadly consists of two parts, Methods Study and Time Study. Method study is concerned with the reduction of the work content of a job or the operation, while Time Study is mostly concerned with the investigation of any ineffective time associated with it. Method study and Time Study are closely linked and using both techniques, time standards are established for the operation when carried out in the improved method. After establishing the Standard times, these are used for a number of applications which shall be explained in this course.Standard work means working on standards to produce correct and consistent results. It is considered a way to achieve the highest possible degree of consistency and reliability in any process. It aims to ensure that everything is done by everyone in the same way and in the best possible way.Therefore, it is important to identify the right process steps and their right sequence and time frames before the implementation of standard work.The standards developed by virtue of work measurement act as a pre-requisite for many important applications used in organizations. These will be explained one by one.Before starting any new learning, it is always good to know a brief history and evolution of the same. So the course shall start with the evolution and history of method study and time study.
Overview
Section 1: Introduction
Lecture 1 Opening Lecture
Lecture 2 Evolution of Work Study
Lecture 3 Methods Study
Section 2: Time Study Techniques
Lecture 4 Time Study Introduction
Lecture 5 Time Study Basics
Lecture 6 Stop Watch Time Study
Section 3: Other Time Study Techniques
Lecture 7 Work Sampling Technique
Lecture 8 Predetermined Motion Time Systems
Section 4: Applications of Work Measurement
Lecture 9 Preamble: Applications of Work Measurement
Lecture 10 Applications of Work Measurement
Lecture 11 Assembly Line Balancing
Section 5: Wrap up and Conclusion
Lecture 12 Wrap up and Conclusion
Lecture 13 Good Luck Video
Practicing Industrial Engineers and Time Study practitioners. Students pursuing course in Industrial Engineering and Work Measurement and those aspiring to work as Industrial Engineers. Working professionals looking for better career options. Senior executives like GM and even CEOs for refreshing their concepts.
https://www.udemy.com/course/mastering-work-measurement-techniques-and-applications/