Master All Devices Including Routers/Switches/Access Points/WLC And There Corresponding Protocols And Services.

What you'll learn

TCP/IP Addressing
What's The Purpose Of A Router And A Switch and Why Need It.
Setup Basic CLI Including HostName,Passwords,UserName,History Size,Banner,Encrypting Passwords.
Setting Direct and Remote (Telnet,SSH) Connections To Router And Switch.
How To Configure A DHCP Server. DHCP Relay And DHCP Snooping
NAT And Its Types and The Purpose Of NAT
Fault Tolerance To A Router By Configuring HSRP
How To Make The Router As A Firewall By Creating Access Lists.
What Is A Private Network VS A Public Network.
What is STP /RSTP (Preventing Network Loops)
How To Secure The Switch Using Port Security
What Are VLANS / InterVLAN Routing And VTP.
Channel Groups Using LACP/PAGP (Fault Tolerance For Cables).
What Is A Broadcast and Collision Domain.
How To Configure Static Routing / Floating Routes/ Default Routes.
What Is Dynamic Routing And How Its Applied Step By Step
When To Use More Than One Routing Protocol (RIP,EIGRP,OSPF).
What Is The Administrative Distance And Its Role On Choosing The Routing Protocol.

Requirements

Basic Computer/Network Skills

Description

About This Class ( My Entire Course is 100% HANDS ON)If you want to jumpstart your career in IT and networking by acing The CLI For Configuring Cisco Switches/Routers Than This Course Is For You.This is the one course you need Master The CLI. 100% Full lab Simulation is Covered so you'll get the hands-on practical skills as you are working on real world networks.Why This ClassThis Short Course Will be the same as You worked as a Junior Network Engineer For a Company For at least 2 Years. This Class Will be The same as You were Setting Up Cisco Routers And Switches In a Real Environment.What Will You Gain From This ClassThis course will teach you and enhance your skills in better understating by actually doing it as we were in the same classroom utilizing Cisco Routers And Switches using Cisco Packet Tracer.In This Course you will not just learn you will actually do it yourself as if you were in an actual company and here are the key topics that you will gain from this class.1) IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)2) What's The Purpose Of A Router And A Switch and Why Need It.3) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.4) Setting Direct and Remote (Telnet,SSH) Connections To The Router.5) Configuring IP Address/

Description

/Duplex/Speed To Interfaces.6) Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).7) How To Break(Hack) Into The Router And A Switch.8) Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.9) Setup A Banner For The Router And A Switch10) What is A MAC Address Table And A Routing Table.11) What Is an NTP Server.12) What Is AAA.13) How To Configure And Manage DHCP Server On A Router14) What is A DHCP Relay and How It Works15) When Do You Need DHCP Snooping.16) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).17) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)18) How Can We Provide Fault Tolerance For A Router (HSRP).19) Understanding Of The TCP/IP Classes (Private And Public Networks).20) How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.21) How To Secure The Switch Using Port Security22) What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).23) When Do I need VTP and Its Importance on Large Scale Network.24) What is an EtherChannel and Its Types (LACP,PAGP).25) What is Trunking and Its Purpose On The Switch26) What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).27) What is The Difference between a Switch and a Hub.28) TCP/IP Addressing And Subnetting.29) What Are Switch Loops And How To Prevent Them Using STP/RSTP.30) How To Configure Routing Between Different Sites31) Configure Static Routing / Floating Routes And Default Routes32) What is The Difference between Dynamic and Static Routing and When To Use.33) Configure Dynamic Routing Protocols (RIP,OSPF,EIGRP)34) What Is The Wild Card Mask and Why Important For Some Routing Protocols.35) How Can We Provide Fault Tolerance For Routing Protocols.36) What Is TCP/IP And Its Classes 37) What's The Difference Between Classful and Classless Networks 38) Learn Subnetting.39) How To Secure Routing Protocol.40) How To Configure And Manage DHCP Server On A Router41) What is A DHCP Relay and How It Works42) When Do You Need DHCP Snooping.43) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).44) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)45) How Can We Provide Fault Tolerance For A Router (HSRP).46) Understanding Of The TCP/IP Classes (Private And Public Networks).Who is This Class For 1) Network Engineers /System Administrators.2) IT Support Techs.3) Help Desk Analyst.4) Any One Who wants to get themselves in The IT Field.Facts About The CourseDo I need any Work experience?If You or Don't Work In The IT Field You Should Be Fine Taking This Course.Will I Get Support From You?Yes You will.I Already Work In The IT Field Will I Benefit From This Course?Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.Will I get a certificate of completion at the end?Yes You Will.

Who this course is for

Network Engineer/Admin
IT Support Specialist
Help Desk Tech
Any One Who Wants To Enter The Cisco World
Homepage:

https://www.udemy.com/course/cisco-ccna-200-301-labs-only-dont-just-be-a-paper-cert/